TRAINING WELLHEAD INSTRUMENTATION AND HYDRAULIC CONTROL SYSTEMS DI JAKARTA
TRAINING PENGENALAN WELLHEAD INSTRUMENTATION AND HYDRAULIC CONTROL SYSTEMS DI JAKARTA
TRAINING SISTEM PENGENDALI HIDROLIK DI JAKARTA
TRAINING INTRODUCTION:
A wellhead is a general term used to describe the component at the
surface of an oil or gas well that provides the structural and
pressure-containing interface for the drilling and production
equipment. The primary purpose of a wellhead is to provide the
suspension point and pressure seals for the casing strings that run
from the bottom of the hole sections to the surface pressure control
equipment. Once the well has been drilled, it is completed to provide
an interface with the reservoir rock and a tubular conduit for the
well fluids. The surface pressure control is provided by a christmas
tree, which is installed on top of the wellhead, with isolation valves
and choke equipment to control the flow of well fluids during
production.
TRAINING OBJECTIVE:
You will be able to:
1. Understand the well activities
2. Understand the concept of wellhead
3. Understand the instrumentation and control
4. Know the instrumentation and control
5. Understand the hazardous area at wellhead
6. Understand the valves and choke valves
7. Understand the safety marking of instrumentation
8. Understand the schematic diagram
9. Understand the specification break in P&ID
10. Know the control systems
TRAINNIG MATERIAL OUTLINE:
1. General principles
2. Pressure Concepts
3. Causes and Warning Signs of Kicks
4. Shut-in Procedures and Shut-in Pressure
5. Specification equipment for pressure
6. Circulation and Well Control
7. Formation Fracture Gradient
8. Well-Control Methods
9. Unusual Well-Control Operations
10. Well Control for Completion and Workover
11. Well Control and Floating Drilling Rigs
12. Blowout Prevention Equipment
13. Wellhead Equipment
14. Valves and Chokes
15. Specification Break
16. Wellhead Control Systems
17. Hazardous Classification Area
18. Instrumentation Marking and Classification
19. Well safety systems
CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:
* Study Case
* Simulation
TRAINING INSTRUCTOR
Ir. Endra Joelianto, Ph.D. is an expert in control engineering and
industrial automation. His outstanding research is: Hybrid Control
Systems, Discrete Event Control Systems, Petri Nets Analysis and
Application on PLC, Robust and Advanced PID Controller and its
implementation on PLC, DCS, Fieldbus, Industrial automation and
Advanced Control System Designs. He received first degree (Ir.) in
Engineering Physics in 1990 from Department of Engineering Physics,
ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from
Department of Engineering, The Australian National University,
Canberra, Australia. He is Head of Intelligent Control and Automation
Laboratory and Coordinator of PLC Research Group for research and
training, Engineering Physics Study Program and Instrumentation and
Control Research Division, Institut Teknologi Bandung.
He was Director of Schneider-OMRON PLC Training Center, Maranatha
Christian University, Bandung. He has attended several professional
training on PLC, DCS and Instruments Callibration, such as: Yokogawa
DCS, Bandung (2000), Implementation of Indonesian National Standard
(SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation,
Bandung (2001), Fieldbus Foundation Technology, Singapore (2002),
Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and
Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in
Industries (Bandung 2005), Effective Energy Systems for Sustainable
Development (Thailand 2006), Programming and Networking PLC Mitsubishi
(2006), InTouch Wonderware, Wonderware Historian and Information
Server (Bandung, 2012). He also has hosted Workshop on Industrial
Automation (Bandung, 2002) and (Bandung, 2003), Workshop on
Application of PLC in Industrial Automation (Bandung, 2003), National
Workshop on Instrumentation & Control (2011) and many professional
trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial
Process Control and Automation in Bandung.
He was the project leader of Department of National Education TPSDP
Retooling Program Batch II on Industrial Automation using PLC (2004).
He is the chairman of National Student Competition on PLC Programming
held regularly since 2007 in ITB. He serves as instructor either for
public or for in-house training on instrumentation and process control
to universities, industries, petrochemical or oil and gas companies,
such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT.
Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen
Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda
Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus,
Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia,
PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB,
Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total
Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc.
He has delivered more than 150 professional training programs on
Instrumentation and Control. He also serves as instrumentation and
control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of
Energy and Mineral Resources – Indonesia.
Jadwal Pelatihan Ruang Training 2019 : pelatihan pengenalan Wellhead Instrumentation And Hydraulic Control
Lokasi Pelatihan Tahun 2021 :
Yogyakarta, Hotel Dafam Seturan
Jakarta, Hotel Amaris La Codefin Kemang
Bandung, Hotel Grand Serela Setiabudhi
Bali, Hotel Ibis Kuta
Lombok, Hotel Jayakarta
Catatan :
- Waktu pelatihan Dua+1* hari dengan Biaya tersedia untuk Perorangan, Group, dan Inhouse Training, belum termasuk akomodasi/penginapan.
- Untuk biaya dan jadwal training harap menghubungi marketing kembali
Investasi training:
Investasi pelatihan selama dua hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas training:
Free Penjemputan dari bandara ke hotel*.
Modul / Handout.
Flashdisk*.
Certificate of attendance.
FREE Bag or bagpacker.
Training Kit (Photo Documentation, Blocknote, ATK, etc).
2x Coffe Break & 1 Lunch.
Souvenir .
