TRAINING ADVANCED OIL AND GAS PRODUCTION SYSTEM DI JAKARTA

TRAINING SISTEM PRODUKSI MINYAK DAN GAS CANGGIH DI JAKARTA

TRAINING PRODUCTION EQUIPMENT SUCH AS WELLHEAD DI JAKARTA

Pembicara / Fasilitator
Dr.Ir.  Sudjati  Rachmat, DEA. adalah dosen di jurusan perminyakan ITB
sejak  tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun
1977,   kemudian   melanjutkan   pendidikannya   di   Diplome  d’Etude
Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun
1985  –  1987  beliau mengambil program Docteur en Mecanique de Fluide
(Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.
Dr.  Sudjati  Rachmat sering menjadi instruktur dalam banyak pelatihan
yang   berkaitan   dengan  perminyakan  untuk  perusahaan  di  seluruh
Indonesia,  diantaranya  seperti Pertamina, Chevron, Badak LNG, Total,
Vico,  Mobil  Oil  Indonesia,  Ministery  of Mining and Energy, Unocal
Indonesia,  Lemigas,  IATMI-IWPL  Migas, PPTM Migas, PT Caltex Pacific
Indonesia, Gulf, Arco, dll.

Topik-topik   training   yang   Beliau  sampaikan  diantaranya  adalah
production   surface   and   down   hole  equipment,  Basic  Reservoir
Engineering,  Sucker  Rod  Pumping  Theory  and  Practice,  Production
Logging  Engineering, Nodal Analysis and Production Optimization, Well
Test,  Operation  and  Interpretation,  Well  Design,  Completion  and
Workover,  Numerical  and Statistical Method for Petroleum Engineering
Problems,  Oil-Well  Stimulation, Hydraulic Fracturing, Statistics for
Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery,
Applied  Reservoir  Engineering  and  Reservoir Simulation, Aspects of
Horizontal  Well Technology, Geology and Geophysics Modeling, Advanced
Programming  on  Numerical Analysis and Industrial Information System,
Management  Information  System,  Well  Stimulation  of  Oil  and  Gas
Reservoir,  Horizontal Well Technology, Transportation of Oil and Gas,
Sand Control Technology, dan lain-lain.
Beliau   banyak   melakukan  penelitian  di  bidang  MIGAS  dan  telah
mempublikasikan dan menseminarkannya di forum dunia.

ABOUT THE COURSE
The  rapidly  increasing worldwide demand for natural gas as an energy
source requires expertise in gas engineering technology. Incorporating
a  balance  between  theory  and  application,  course  emphasis is on
training participants for immediate application of acquired techniques
to field problems.

Production  is  defined  as  the  operations involved in bringing well
fluids  to  the  surface  and  preparing the fluids for transport to a
refinery  via  pipelines or trucks. The first step in production is to
start   the   well   fluids  flowing  to  the  surface  (called  “well
completion”).  Well  servicing  and  workover  consists  of performing
routine  maintenance operations (such replacing worn or malfunctioning
equipment)  and  performing more extensive repairs, respectively. Well
servicing  and  workover  are  an  intermittent  step and necessary to
maintain  the  flow  of oil and gas. Next, the fluid must be separated
into  its  components of oil, gas, and water; stored; and treated (for
purification),  measured,  and  tested before being transported to the
refinery.

This  training  will  provide the principle and yet some practical and
theoretical  aspect  that  can  be  applied  on  daily  work  faced by
production engineers and supervisor in the oil industry.

SUBJECT LEARNED
1. All  aspects  of  completions  are covered in sufficient detail to
permit participants to review his/her current practices
2. The fundamental concepts of production operations and their proper
application in the field
3. Production  equipment  such  as wellhead, tubing and packers, well
completions  and  workover  as  well  as  well  test and problems,
production logging and cementing will also covered
4. Production   logs  and  how  and  when  to  use  them;  evaluation
techniques for cement bond logs and pulse echo tools

BENEFITS
* Learn  how  to  plan  and  implement  well completions, workovers,
stimulation  treatments, and routine production operations with an
efficiency that increases profits
* Learn   about   the   role   of  rock  mechanics  in  completions,
stimulation, and workovers
* Be  able to give suggest or discover the procedures and techniques
that increase production and cut operating costs
* Be   Able   to   identify  and  implement  production  improvement
opportunities  that  can  be  carried out by either rig or non-rig
well interventions
* Implementation  of appropriate technology, either from internal or
external  sources,  in  well design, whilst ensuring that the well
value is maximised

COURSE OUTLINE
1. GEOLOGICAL CONSIDERATION
+ Formation Rock
+ Primary and Secondary Migrations
+ Reservoir Traps
2. RESERVOIR FUNDAMENTALS THEORY
+ The Nature of Rocks and Fluids
+ Porosity and Permeability
+ Productivity Index
+ Volumetric Calculation
+ Other Calculations and Decline Curves
3. FLUID FLOW
+ Well Productivity
+ Choke and Reservoir Fluids
+ Inflow and Outflow
4. PRODUCTION OPERATIONS
+ Well head and Well Head Equipment
+ Multiple Orifice
+ Routine Operations
+ Opening and Shut-in Well Procedure
5. WELL TESTING AND SATELLITE SYSTEM
+ Test Separator Operations and Equipments
+ Gas Systems Instruments
+ Flare System and Depressurising
+ Pigging Techniques and Procedures
+ Sampling and Analysis
+ BS & W and API Gravity Measurement
+ Protective Steam Tracing
6. SURFACE PRODUCTION OPERATIONS
+ Process, Level, Temperature and Pressure Controls
+ Oil treating , Heater treater and Dehydrator
+ Separators, Stage Separators and Sizing
+ Two-phase and Three-phase Separation
+ Skimmer tank and Flotation unit
7. WELL PROBLEMS
+ Low Production and Formation Damage
+ Low Reservoir
+ Plug-in Tubing or Perforations
+ High Viscosity
+ High Back Pressure
+ Inadequate Artificial Lift
+ Water Production and Mechanical Problem
+ Protective Steam Tracing
8. PRODUCTION LOGS
9. WELL COMPLETIONS
10. PRIMARY CEMENTING AND SQUEEZE CEMENTING
11. FLUID COMPLETIONS
12. SAND CONTROL
Gravel Pack, Resin and Fraspac
13. WORKOVERS
14. PARAFFIN AND ASPHALTENES
+ Chemical analysis
+ Precipitation Mechanism
+ The wax and Paraffin Problems
15. OIL EMULSIONS
+ Emulsion Built-up and Emulsifying Agent
+ Sampling and Analysis
+ Emulsion Treating
+ Heat and Chemical Treatment
+ Electrostatic Coalescing
16. SCALE PROBLEMS
+ Scale Composition, Prediction and Identification
+ Mechanic and Chemical methods
+ Scale Prevention and Inhibitors
17. CORROSION PREVENTIONS
+ Basic Theory
+ Detection and Measurement
+ Prevention and Material Used
+ Coating and Chemicals
+ Cathodic Protections and inhibitors

Program ini dirancang untuk :
* Production, Operations, Facilities and Senior Petroleum Engineers
* Surface Equipment Technicians, Technical or Reservoir Engineers
* Supervisory   Personnel   who   interact   with   field   facility
engineers/operators
* Production Managers and Field Production Supervisors
* Engineers  and  other  personnel involved with the daily operation
and management of producing oil and gas wells.

 

Lokasi Pelatihan Tahun 2021 :

Yogyakarta, Hotel Dafam Seturan

Jakarta, Hotel Amaris La Codefin Kemang

Bandung, Hotel Grand Serela Setiabudhi

Bali, Hotel Ibis Kuta

Lombok, Hotel Jayakarta

Catatan :

• Waktu pelatihan Dua+1* hari dengan Biaya tersedia untuk Perorangan, Group, dan Inhouse Training, belum termasuk akomodasi/penginapan.
• Untuk biaya dan jadwal training harap menghubungi marketing kembali

 

 

Investasi training:

Investasi pelatihan selama dua hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

 

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

 

Fasilitas training:

Free Penjemputan dari bandara ke hotel*.

Modul / Handout.

Flashdisk*.

Certificate of attendance.

FREE Bag or bagpacker.

Training Kit (Photo Documentation, Blocknote, ATK, etc).

2x Coffe Break & 1 Lunch.

Souvenir .